CODAR Ocean Sensors - Products

General Specifications

SeaSonde Site Installation
Schematic
PDF approx. 400k


	SeaSonde Remote Unit Specifications & Configuration Options (SSRS-100)

	Auto-APM Kit (SSDA-APM)

	SeaSonde Central Site Management/ Data Combining Station SSDP-100

	Combine Suite License Upgrade - Extended Version (SSDP-CS-UPEX)

	PORTUS® Marine Information System (SSDP-PORTUS)

	*NEW* Advanced Feature - Multi-Static Functionality

	SeaSonde Multi-Static Data Processing Software Package (SSDA-ES100)

	SeaSonde Bistatic Transmitter Package SSBT-100

	Vessel Detection Software (SSDA-SHIP)

	Pushing the Range of Your SeaSonde

	Protecting the SeaSonde from Lightning and Other Electrical Surges
SeaSonde Network Accessories
	Transponder & Transponder Extender Kit (SSTR-101 & SSTR-EX)

	Field Service Kit (FSK-100)

	Antennae Base Hinge Assembly (SSRA-BSHG-A)

	Dome Antennae Guy Rope Holder (SSRA-GR-A)

	Connector & Adapter Kit (CAK-200)

	External Hard Disk, (FireLite)

	Extended Lightning Protection Kit (LT-E1)

	UPS Power Conditioning Unit (UPS-1500)

	SeaSonde SatDrive Kit (SSDA-SATD)

	SeaSonde Enclosure (ENC36-B)

>> Download this document (PDF approx. 70k)

CODAR OCEAN SENSORS

Connector & Adapter Kit †

CODAR Product Code: CAK-200

Product Description: The SeaSonde Connector & Adapter Kit contains a variety of connector and adapters that are used inside cable replacement and repair activities. CAK-200 Includes†:
• (1) Plastic, compartmentalized case • (5) BNC connector -RG58 type • (5) TNC connector- RG58 type • (5) N connector- RG58 type • (5) N crimp connector- RG8 type • (1) 12” heat shrink- RG8 type • (1) 12” heat shrink- RG58 type • (1) N plug to BNC jack adapter • (1) N jack to TNC plug adapter • (1) BNC plug to TNC jack adapter • (1) BNC jack to SMA plug adapter	• (2) N jack to N jack adapter • (1) SMA jack to SMA jack adapter • (1) TNC jack to TNC jack adapter • (1) 6” SMA plug to SMA plug RG316 cable • (1) 3” SMA plug to SMA plug RG316 cable • (1) Electrical insulating compound • (1) BNC plug- 50 Ohm resistor terminal • (5) 5A Fuses for 100V or 2.5A fuses for 220V (fuse voltage type provided based on SeaSonde voltage purchased) • Zip cable tie

† Specifications and appearance are given as guidelines and may change without notice.

SSRA-GR-A specifications, v2, rev 12/2016

	© CODAR Ocean Sensors 2000 - 2021
	About CODAR \| Intro to HF Radar \| News \| Products \| Support \| Contact Us \| Help \| Partners Sales Support